说明书 阿里斯顿 LFT 216 A TW.R 洗碗机
需要您的 阿里斯顿 LFT 216 A TW.R 洗碗机 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 11 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
EN
2
Installation - Assistance
Keep this instruction manual in a safe place for future
reference. If the appliance is sold, given away or moved,
please ensure the manual is kept with the machine, so that
the new owner may benefit from the advice contained within
it.
Please read this instruction manual carefully: it contains
important information regarding the safe installation, use and
maintenance of the appliance.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
This appliance is intended to be used in household and
similar applications such as:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential type
environments;
- bed and breakfast type environments.
Positioning and levelling
1. Remove the appliance from all packaging and check that
it has not been damaged during transportation.
If it has been damaged, contact the retailer and do not
proceed any further with the installation process.
2. Check the dishwasher by placing it so that its sides or back
panel are in contact with the adjacent cabinets or even with
the wall. This appliance can also be recessed under a single
worktop
*
(see the Assembly instruction sheet).
3. Position the dishwasher on a level and sturdy floor. If
the floor is uneven, the front feet of the appliance may be
adjusted until it reaches a horizontal position. If the appliance
is levelled correctly, it will be more stable and much less likely
to move or cause vibrations and noise while it is operating.
4. Adjust the height of the rear foot from the front of the
appliance
* on the central lower part of the dishwasher, turning
a hexagonal spanner (red color) with an opening of 8 mm in a
clockwise direction to increase the height or in an anticlockwise
direction to decrease the height.
Connecting the water and electricity
supplies
Connection to the water and electricity supplies should
only be performed by a qualified technician.
The dishwasher should not stand on top of the water
hoses or the electricity supply cable.
The appliance must be connected to the water supply
network using new hoses.
Do not use old hoses.
The water inlet and outlet hoses and the electricity supply
cable may be positioned towards the right or the left in order
to achieve the best possible installation.
Connecting the water inlet hose
• Toasuitablecoldwaterconnectionpoint:beforeattaching
the hose, run the water until it is perfectly clear so that any
impurities that may be present in the water do not clog the
appliance; after performing this operation, screw the inlet
hose tightly onto a tap with a ¾ gas threaded connection.
• Toasuitablehotwaterconnectionpoint:yourdishwasher
may be supplied with hot water from the mains supply (if
you have a central heating system with radiators) provided
that it does not exceed a temperature of 60°C.
Screw the hose to the tap as described for connection to
a cold water supply.
If the inlet hose is not long enough, contact a specialist store
or an authorised technician
(see Assistance).
The water pressure must be within the values indicated in the
Technical data table
(see adjacent information).
The hose should not be bent or compressed.
Connecting the water outlet hose
Connect the outlet hose (without bending it) to a drain duct
with a minimum diameter of 4 cm.
The outlet hose must be at a height ranging from 40 to 80
cm from the floor / surface where the dishwasher rests (A).
Before connecting the water outlet hose to the sink drain,
remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device
New Acqua Stop
*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut
as it contains live electrical parts.
* Only available in selected models.
Loading…
常见问题
请给产品评分，告知您对阿里斯顿 LFT 216 A TW.R 洗碗机看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 阿里斯顿 LFT 216 A TW.R 洗碗机 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Ariston。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 阿里斯顿 LFT 216 A TW.R 洗碗机 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Ariston |
| 模型 | LFT 216 A TW.R |
| 类别 | 洗碗机 |
| 文件类型 | |
| 文件大小 | 7.1 MB |
关于 阿里斯顿 LFT 216 A TW.R 洗碗机 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
我可以在洗碗机运行时打开它吗？ 验证
大多数洗碗机都配备了止水装置，一旦打开门，程序将立即停止运行，这意味着不会有水流出。对于某些模型，随着时间的推移，这可能会引起问题。使用内置洗碗机，可能会在运行时频繁打开洗碗机，因为释放出的蒸汽可能导致水损坏周围的橱柜。
有帮助 (1029) 阅读更多洗碗机运行完毕后，我应该打开洗碗机以使其更快地干燥吗？ 验证
这取决于洗碗机的类型和洗碗机的位置。一些洗碗机配有在洗涤程序后将餐具烘干的功能。在那种情况下，打开洗碗机将没有附加值。使用内置洗碗机，可能会在运行时频繁打开洗碗机，因为释放出的蒸汽可能导致水损坏周围的橱柜。
有帮助 (824) 阅读更多洗碗机完成其循环后，塑料餐具仍是湿的，而其余的则没有。这是为什么？ 验证
塑料是不良的热导体，可以使产品快速冷却。然后，残留在上面的水分蒸发得比例如在陶瓷或金属上少得多。
有帮助 (741) 阅读更多我可以将洗碗机连接到延长线上吗？ 验证
需要大量电源的设备（例如洗碗机）无法连接到所有延长线上。查看洗碗机的功率（以瓦特为单位），并检查延长线cn是否可以处理此功率。有些延长线带有较粗的电缆，用于处理较大的设备。
有帮助 (672) 阅读更多我可以在洗碗机中放入木铲，切菜板等木制物品吗？ 验证
不能。木制物品在洗碗机中可能会损坏或翘曲。另外，释放的木纤维可能会损坏洗碗机。木制切菜板通常用胶水制成，在洗碗机中清洗几次后，胶水会松散。
有帮助 (655) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 阿里斯顿 LFT 216 A TW.R 洗碗机 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。