说明书 飞利浦 GC3340 熨斗
需要您的 飞利浦 GC3340 熨斗 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 5 个常见问题，1 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
ENGLISH
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benet from the support that Philips offers,
register your product at www.philips.com/welcome.
Important
Read this user manual carefully before you use the
appliance and save it for future reference.
Danger
Never immerse the iron in water.
Warning
Check if the voltage indicated on the appliance
corresponds to the local mains voltage before you
connect the appliance.
Do not use the appliance if the plug, the mains cord
or the appliance itself shows visible damage, or if the
appliance has been dropped or leaks.
If the mains cord is damaged, you must have it
replaced by Philips, a service centre authorised by
Philips or similarly qualied persons in order to avoid
a hazard.
Never leave the appliance unattended when it is
connected to the mains.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Do not let the mains cord come into contact with
the hot soleplate of the iron.
Caution
If the appliance is provided with an earthed plug, it
must be plugged into an earthed wall socket.
Check the mains cord regularly for possible damage.
The soleplate of the iron can become extremely hot
and may cause burns if touched.
When you have nished ironing, when you clean the
appliance, when you ll or empty the water tank and
also when you leave the iron even for a short while:
set the steam control to position 0, put the iron on
its heel and remove the mains plug from the wall
socket.
Always place and use the iron on a stable, level and
horizontal surface.
Do not put perfume, vinegar, starch, descaling agents,
ironing aids or other chemicals in the water tank.
This appliance is intended for household use only.
This Philips appliance complies with all standards
regarding electromagnetic elds (EMF). If handled
properly and according to the instructions in this user
manual, the appliance is safe to use based on scientic
evidence available today.
A Spray nozzle
B Filling opening with cap
C Steam boost button ( 9)
D Spray button ( 8)
E Steam control
F Amber temperature light (specic types only: with
red auto-off indication)
G Calc-Clean button
H Temperature dial
I Mains cord
J Heel
K Anti-Calc tablet (specic types only)
L Water tank
Not shown: lling cup
1 Remove any sticker, protective foil or plastic from
the soleplate (Fig. 2).
Do not put perfume, vinegar, starch, descaling agents,
ironing aids or other chemicals in the water tank.
1 Make sure the appliance is unplugged.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
2 Set the steam control to position 0 (= no
steam) (Fig. 3).
3 Openthecapofthellingopening.
4 Tilttheironbackwardsandusethellingcuptoll
the water tank with tap water up to the maximum
level. (Fig. 4)
Do not ll the water tank beyond the MAX indication.
5 Closethecapofthellingopening(‘click’).
1 Put the iron on its heel.
2 To set the required ironing temperature, turn the
temperature dial to the appropriate position (Fig. 5).
Check the laundry care label for the required ironing
temperature:
1 for synthetic fabrics (e.g. acrylic, nylon, polyamide,
polyester)
1 for silk
2 for wool
3 for cotton and linen
If you do not know what kind or kinds of fabric an article
is made of, determine the right ironing temperature by
ironing a part that is not visible when you wear or use
the article.
Silk, woollen and synthetic materials: iron the reverse side
of the fabric to prevent shiny patches. To prevent stains,
do not use the spray function.
Start ironing the articles that require the lowest ironing
temperature, such as those made of synthetic bres.
3 Plug in the appliance. If the appliance has an earthed
plug, put the mains plug in an earthed wall socket.
The amber temperature light goes on (Fig. 6).
4 When the temperature light goes out, wait a while
before you start ironing.
The temperature light goes on from time to time during
ironing.
Note: The iron may give off some smoke when you use it for
the rst time. This stops after a short while.
Steam ironing
1 Make sure that there is enough water in the water
tank.
2 Set the recommended ironing temperature (see
chapter‘Preparingforuse’,section‘Settingthe
temperature’).
3 Set the appropriate steam setting. Make sure that
the steam setting is suitable for the set ironing
temperature: (Fig. 7)
1 - 2 for moderate steam (temperature settings 2
to 3)
3 - 4 for maximum steam (temperature settings
3 to MAX)
Note: The iron starts to produce steam as soon as it
has reached the set temperature.
Note: If the selected ironing temperature is too low (MIN
to 2), water may drip from the soleplate (see chapter
‘Features’, section ‘Drip stop’).
1 Set the steam control to position 0 (= no
steam) (Fig. 3).
2 Set the recommended ironing temperature (see
chapter‘Preparingforuse’,section‘Settingthe
temperature’).
Spray function
You can use the spray function at any temperature to
moisten the article to be ironed. This helps remove
stubborn creases.
1 Make sure that there is enough water in the water
tank.
2 Press the spray button several times to moisten the
article to be ironed (Fig. 8).
-
-
-
-
,
-
-
A powerful steam boost helps to remove very stubborn
creases.
The steam boost function can only be used at
temperature settings between 2 and MAX.
1 Press and release the steam boost button (Fig. 9).
The concentrated steam boost from the long vents in
the Steam Tip enhances the distribution of steam into
every part of your garment. The concentrated steam
boost function can only be used at temperature settings
between 2 and MAX.
1 Press and release the steam boost button (Fig. 10).
You can also use the steam boost function when you hold
the iron in vertical position. This is useful for removing
creases from hanging clothes, curtains etc.
1 Hold the iron in vertical position and press and
release the steam boost button (Fig. 11).
Never direct the steam at people.
This iron is equipped with a drip-stop function: the
iron automatically stops producing steam when the
temperature is too low, to prevent water from dripping
out of the soleplate. When this happens you may hear a
sound.
The automatic shut-off function automatically switches off
the iron if it has not been moved for a while.
The red auto-off indication of the temperature light
ashestoindicatethattheironhasbeenswitched
off by the automatic shut-off function (Fig. 6).
To let the iron heat up again:
1 Pick up the iron or move it slightly
The red auto-off indication goes out.
If the temperature of the soleplate has dropped
below the set ironing temperature, the amber
temperature light goes on.
2 If the amber temperature light goes on after you
have moved the iron, wait for it to go out before
you start ironing.
Note: If the amber temperature light does not go on
after you move the iron, the soleplate still has the right
temperature and the iron is ready for use.
Cleaning and maintenance
Cleaning
1 Set the steam control to position 0, remove the
plug from the wall socket and let the iron cool
down.
2 Wipeakesandanyotherdepositsoffthe
soleplate with a damp cloth and a non-abrasive
(liquid) cleaning agent.
To keep the soleplate smooth, avoid hard contact with
metal objects. Never use a scouring pad, vinegar or
other chemicals to clean the soleplate.
3 Clean the upper part of the iron with a damp cloth.
4 Regularly rinse the water tank with water. Empty
the water tank after you have rinsed it (Fig. 12).
The Double-Active Calc System consists of an Anti-Calc
tablet inside the water tank combined with the Calc-
Clean function.
1 The Anti-Calc tablet prevents scale from clogging the
steam vents. This tablet is constantly active and does
not need to be replaced (Fig. 13).
2 The Calc-Clean function removes the scale particles
from the iron.
Use the Calc-Clean function once every two weeks. If
the water in your area is very hard (i.e. when akes come
out of the soleplate during ironing), use the Calc-Clean
function more frequently.
,
,
,
4239.000.6595.3
2/9
Loading…
常见问题
请给产品评分，告知您对飞利浦 GC3340 熨斗看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 飞利浦 GC3340 熨斗 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 GC3340 熨斗 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Philips |
| 模型 | GC3340 |
| 类别 | 熨斗 |
| 文件类型 | |
| 文件大小 | 1.88 MB |
关于 飞利浦 GC3340 熨斗 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
加入有关该产品的对话
您可以在这里分享您对 飞利浦 GC3340 熨斗 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。