说明书 飞利浦 QG3340 Multigroom 胡须修理器

说明书

Precision attachments for use on

face

Nose trimming

You can use the nose trimmer attachment to trim

your nose hair and ear hair.

- Make sure your nostrils are clean. Make sure

your outer ear channels are clean and free from

wax.

- Do not insert the tip more than 0.5cm and make

controlled movements.

Nose trimmer rotary

Trimming nose hair:

- Gently move the tip in and out of your nose

while turning it round to remove unwanted hairs

(Fig. 10).

Trimming ear hair:

- Slowly move the tip round the ear to remove

hairs that stick out beyond the rim of the ear.

- Gently move the tip in and out of the outer ear

channel to remove unwanted hairs (Fig. 11).

Detail trimmer (21mm)

You can use the detail trimmer without comb to

create ne lines and contours around your facial

style, close to the skin (Fig. 12) (to a length of

0.5mm).

Eyebrow and detail comb

You can use the 21mm detail trimmer with

the detail comb attached for tidying up your

eyebrows or trimming your sideburns (Fig. 13).

Detail foil shaver

You can use the detail foil shaver to shave

unwanted hairs on your cheeks and chin with

precision. Gently press the detail foil shaver onto

the skin and shave along contoured edges to

remove any hairs (Fig. 14).

Attachments for use on beard

- We advise you to start at the highest length

setting to familiarize yourself with the

appliance.

- Make controlled movements against the hair

growth and move it over the part that needs

trimming.

Full-size trimmer 32mm

You can use the full-size metal trimmer without

comb to get clean lines around your beard, neck

and sideburns close to the skin (Fig. 15) (to a length

of 0.5mm).

Beard and stubble comb

You can use the beard and stubble comb attached

to the full size trimmer to evenly trim your beard,

stubble and moustache. You can choose any

setting between 1 and 18mm in steps of 1mm

(Fig. 16).

Attachments for use on head

Hair clipping with comb

- Comb the hair in the growth direction.

- Slowly move the trimmer against the hair

growth direction. Press lightly.

- Since hair grows in dierent directions,

you need to move the appliance in dierent

directions as well (upward, downward or

across).

- Always make sure that the at part of the comb

is in full contact with the scalp to obtain an

even result.

- When you trim for the rst time, start at the

highest length setting (20mm) to familiarise

yourself with the appliance.

Hair clipping without comb:

- Be careful when you trim without comb

because the trimmer removes every hair it

touches.

- Before you start to contour the hairline around

the ears, with any comb attachment, comb the

hair ends over the ears.

- Tilt the appliance in such a way that only the

edge of the trimmer touches the hair.

- Only cut the hair ends. The hairline should be

close to the ear.

- To contour the neckline and sideburns, turn the

appliance and make downward strokes.

- Move the appliance slowly and smoothly.

Follow the natural hairline.

Full-size metal trimmer 32mm

You can use the full-size metal trimmer without

comb to clip hair very close to the skin (to a length

of 0.5mm) or to create contours around your ears

or neck (Fig. 17).

Hair comb

You can use the hair comb attached to the full size

trimmer for an even haircut.You can choose any

setting between 3 and 20mm in steps of 1mm

(Fig. 18).

Cleaning and storage

Never use scouring pads, abrasive cleaning agents

or aggressive liquids such as petrol or acetone to

clean the appliance.

Always switch o the appliance and

disconnect it from the mains before cleaning.

Never dry the trimmer teeth with a towel or tissue,

as this may damage the trimmer teeth.

1 Remove any comb or attachment from the

appliance.

2 Blow and/or shake out any hair that has

accumulated in the attachments and/or combs

(Fig. 19).

3 Clean the attachments, the combs and the

appliance under a lukewarm tap after every use

(Fig. 20).

4 Carefully shake o excess water and let all

parts dry.

5 Store the appliance and its attachments in the

storage pouch to prevent damage.

Cleaning shaving foils

The shaving foil is very delicate. Handle it carefully.

Replace the shaving foil if it is damaged.

Detail foil shaver

1 Pull the top part of the detail foil shaver o the

bottom part. (Fig. 21)

2 Blow and/or shake out any hair that has

accumulated inside the detail foil shaver.

(Fig. 22)

3 Clean the top part of the detail foil shaver under

a lukewarm tap (Fig. 23).

4 Shake o excess water and leave to dry

completely.

Ordering accessories

To purchase accessories for this appliance, please

visit our online shop at www.shop.philips.com/

service. If the online shop is not available in your

country, go to your Philips dealer or a Philips

service centre. If you have any diculties obtaining

accessories for your appliance, please contact the

Philips Consumer Care Centre in your country. You

nd its contact details in the worldwide guarantee

leaet.

Recycling

- Do not throw away the product with the normal

household waste at the end of its life, but

hand it in at an ocial collection point for

recycling. By doing this, you help to preserve

the environment.

Guarantee and support

If you need information or support, please visit

www.philips.com/support or read the separate

worldwide guarantee leaet.

Guarantee restrictions

Cutting units are not covered by the terms of the

international guarantee because they are subject

to wear.

Troubleshooting

This chapter summarises the most common

problems you could encounter with the appliance.

If you are unable to solve the problem with the

information below, visit www.philips.com/support

for a list of frequently asked questions or contact

the Consumer Care Centre in your country.

Problem Possible

cause

Solution

The combs

do not stay

attached to

the handle

You did

not attach

the comb

correctly.

Slide the comb into

the guiding grooves

on both sides of

the appliance

('click’).

The guiding

grooves are

dirty.

Clean the

appliance and the

guiding grooves

thoroughly.

Problem Possible

cause

Solution

The comb is

broken.

Go to your Philips

dealer or contact

a Philips service

centre to purchase

a new comb.

The

appliance

does

not work

anymore.

The

rechargeable

battery is

empty.

Charge the

appliance (see

chapter 'Charging').

Make sure you

switch o the

appliance before

you charge it.

During charging,

the charging light

on the adapter

ashes. If the

charging light does

not ash, check

whether there is a

power failure or if

the wall socket is

live. If there is no

power failure and

the wall socket

is live but the

charging light still

does not ash,

take the appliance

to your dealer or

a Philips service

centre.

The

appliance

does not

charge

when it is

connected

to the mains.

The

appliance

has to be

switched o

when you

charge it.

Switch o the

appliance.

This

appliance

can only be

used without

a cord.

After charging,

remove the

adapter from the

wall socket and

pull the small

plug out of the

appliance.

The

appliance

does not

trim as well

as it used to.

The cutting

element

of the

attachment

you are using

is dirty.

Remove the

attachment from

the appliance.

Clean the

attachment under

a lukewarm tap.

Make sure that

the appliance

is charged

suciently.

The

appliance

becomes

hot.

The cutting

element

of the

attachment

you are using

is dirty.

Remove the

attachment from

the appliance.

Clean the

attachment under

a lukewarm tap.

常见问题

有关本说明书的更多信息

我们知道，为您的 飞利浦 QG3340 Multigroom 胡须修理器 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 QG3340 Multigroom 胡须修理器 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

飞利浦 胡须修理器 的所有手册
胡须修理器 的更多手册

关于 飞利浦 QG3340 Multigroom 胡须修理器 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

飞利浦 MG3713 胡须修理器

说明书

飞利浦 BT7220 胡须修理器

说明书

飞利浦 BT7520 胡须修理器

说明书

飞利浦 BT1214 胡须修理器

说明书

飞利浦 BT5503 胡须修理器

说明书

飞利浦 BT5520 胡须修理器

说明书

飞利浦 MG7730 胡须修理器

说明书

飞利浦 BT9810 胡须修理器

相关类别