说明书 飞利浦 QP6523 OneBlade 剃须刀
需要您的 飞利浦 QP6523 OneBlade 剃须刀 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 5 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charging
Charging
Charge the appliance before first use and when the
display indicates that the battery is almost empty.
Charging takes approx. 1 hour.
Note: This appliance can only be used without cord
(Fig. 4).
Charging with the supply unit
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance and put
the supply unit in the wall socket (Fig. 7).
The display of the appliance indicates that the
appliance is charging.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
Operating time
A fully charged appliance has an operating time of
up to 60 minutes.
Using the appliance
You can use the appliance to trim, edge or shave
facial hair (beard, moustache and sideburns).
Shave for a smooth result, trim to obtain a certain
length and edge to create perfect edges and sharp
lines. Take your time when you first start to use the
appliance. You have to acquire practice with the
appliance.
This appliance is for use on facial hair. This
appliance is not intended for shaving, edging or
trimming hairs on lower body parts or scalp hair.
Always check the appliance before you use it. Do
not use the appliance or any other part if it is
damaged, as this may cause injury. Always replace
a damaged part with one of the original type.
Note: This appliance can only be used without cord
(Fig. 4).
Switching the appliance on and off
1 To switch the appliance on or off, press the
on/off button once (Fig. 8).
Shaving tips and tricks
- Make sure that the blade is in full contact with
the skin by placing it flat on the skin.
- For the best result, move the appliance against
the grain.
- Make long strokes while pressing lightly.
- You can use the appliance dry or wet with gel or
foam. You can even use the appliance in the
shower.
- Shaving a clean beard and face gives the best
results.
Shaving
Before you use the appliance, always check
the blade for damage or wear. If the blade is
damaged or worn, do not use the appliance, as
injury may occur. Replace a damaged blade
before you use the appliance (see
'Replacement').
1 Switch on the appliance.
2 Place the blade on the skin and move the
appliance up or against the grain in long strokes
while you press it lightly (Fig. 9).
Note: Make sure you hold the surface of the
blade flat against your skin (Fig. 10).
3 Switch off and clean the appliance after every
use (see 'Cleaning and maintenance').
Edging
- You can also use both edges of the blade to
create sharp lines and perfect edges.
- Hold the appliance in such a way that the blade
is perpendicular to the skin and one of its edges
touches the skin. This allows more precise
detailing of sideburns and the area around the
mouth and nose.
1 Switch on the appliance (Fig. 8).
2 Place the edge of the blade perpendicular onto
the skin (Fig. 12).
Note: To use the blade for creating sharp edges
and lines, use either edge of the blade (Fig. 11).
3 Make straight strokes while applying gentle
pressure (Fig. 13).
4 Switch off and clean the appliance after every
use (see 'Cleaning and maintenance').
Cleaning and maintenance
Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as
petrol or acetone to clean the appliance.
Do not tap the appliance against a surface to
remove water from it, as this may cause damage
(Fig. 14). Replace the blade if it is damaged.
Never dry the blade with a towel or tissue, as this
may cause damage.
Cleaning the appliance
1 If a lot of hairs have accumulated on the
appliance, first blow them off (Fig. 15).
2 Then switch on the appliance and rinse the
blade with lukewarm water (Fig. 16).
3 Let the appliance and comb dry.
Note: The blade is fragile. Handle it carefully.
Replace the blade immediately if it is damaged.
Storage
Note: We advise you to let the appliance and its
attachments dry before you store them for the
next use.
Replacement
Usage indicator
For optimal cutting and gliding performance, we
advise you to replace the blade every 6 months,
Loading…
常见问题
请给产品评分，告知您对飞利浦 QP6523 OneBlade 剃须刀看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 飞利浦 QP6523 OneBlade 剃须刀 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 QP6523 OneBlade 剃须刀 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Philips |
| 模型 | QP6523 OneBlade |
| 类别 | 剃须刀 |
| 文件类型 | |
| 文件大小 | 1.08 MB |
关于 飞利浦 QP6523 OneBlade 剃须刀 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
振动剃须刀头和旋转剃须刀头有什么区别？ 验证
这主要是个人需求和偏好的问题，但是通常可以说，振动剃须刀头中的刀片移动得更快，因此可以提供更快的效果。旋转的剃须刀头可以更轻松地到达面部的某些区域。
有帮助 (166) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 飞利浦 QP6523 OneBlade 剃须刀 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。