说明书 飞利浦 RQ312 剃须刀

说明书

Charging

Do not charge the shaver in the packaging.

1 Switch off the shaver.

2 Put the small plug in the shaver.

3 Put the adapter in the wall socket.

, The light on the adapter lights up to

show that the shaver is charging.

Note: The light on the adapter does not

change colour and does not go out when the

shaver is fully charged.

Using the shaver

Note: You can use this shaver while it is

connected to the mains. However, it does not

operate from the mains when the battery is

empty. In this case, rst charge the shaver for

at least 1 hour.

Shaving

Skin adaptation period

Your rst shaves may not bring you the

result you expect and your skin may even

become slightly irritated. This is normal. Your

skin and beard need time to adapt to any

new shaving system.

We advise you to shave regularly (at least

3 times a week) for a period of 3 weeks to

allow your skin to adapt to the new shaver.

During this period, use your new electric

shaver exclusively and do not use other

shaving methods. If you use different shaving

methods, it is more difcult for your skin to

adapt to the new shaving system.

1 Move the on/off slide upwards to

switch on the shaver.

2 Move the shaving heads over your

skin. Make both straight and circular

movements (Fig. 5).

3 Move the on/off slide downwards to

switch off the shaver.

4 Clean the shaver after every

shave (see chapter ‘Cleaning and

maintenance’).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol

or acetone to clean the shaver and its

accessories.

- Clean the shaver after every shave.

- Clean the shaving heads frequently

with Philips Shaving Head Cleaning

Spray (HQ110) for optimal shaving

performance.

- You can clean the outside of the

shaver with a damp cloth. Do not clean

the shaving unit with a cloth.

Cleaning the shaving unit

Be careful with hot water. Always check if

the water is not too hot, to prevent your

hands from getting burnt.

1 Switch off the shaver.

2 Rinse the shaving unit under a hot tap

for some time (Fig. 6).

Note: You can also clean the shaving unit with

the cleaning brush supplied.

3 After rinsing the appliance under the

tap, hold it upright for 10-15 seconds

to allow water to run out of the

bottom.

4 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit

(2). (Fig. 7)

5 Rinse the shaving head holder under a

hot tap for 30 seconds (Fig. 8).

Note: You can also clean the shaving head

holder with the cleaning brush supplied.

6 Carefully shake off excess water and

let the shaving head holder dry.

Never dry the shaving head holder with

a towel or tissue, as this may damage the

shaving heads.

7 Reattach the shaving head holder

to the shaving unit (‘click’) (Fig. 9).

Extra-thorough cleaning method

1 Switch off the shaver.

2 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit

(2) (Fig. 10).

3 To unlock the orange retaining ring,

turn it in the direction of the arrows

indicated in and on the retaining

ring (Fig. 11).

4 Lift the retaining ring out of the

shaving head holder. (Fig. 12)

5 Remove the cutter and the shaving

guard (Fig. 13).

Note: Do not clean more than one cutter

and shaving guard at a time, since they are

all matching sets. If you accidentally put a

cutter in the wrong shaving guard, it may

take several weeks before optimal shaving

performance is restored.

6 Clean the cutter with the cleaning

brush supplied (Fig. 14).

7 Clean the inside of the shaving

guard (Fig. 15).

8 After cleaning, place the shaving guard

back into the shaving head holder.

Make sure the two wings t exactly

into the recesses of the shaving head

holder (Fig. 16).

9 Place the cutter back into the shaving

guard with the cutter legs pointing

downwards (Fig. 17).

10 Place the retaining ring back onto the

shaving head holder (1). To reattach

the retaining ring, turn it against the

direction of the arrows indicated in

and on the retaining ring (2) (Fig. 18).

Note: Make sure the retaining ring is xed

properly. The four wings of the retaining ring

have to be located exactly under the recesses

of the shaving head holder (Fig. 19).

11 Reattach the shaving head holder to

the shaving unit (‘click’). (Fig. 9)

Note: If the shaving unit does not close

smoothly, check if you have positioned the

shaving heads properly and if the retaining

rings are xed properly.

Storage

Note: Make sure the shaving unit is dry before

you store the shaver.

1 Put the protection cap on the shaver

after use to prevent damage and to

avoid dirt accumulation in the shaving

heads (Fig. 20).

Replacement

For maximum shaving performance, we

advise you to replace the shaving heads

every two years. Replace damaged shaving

heads right away.

Only replace the shaving heads with original

RQ32 Philips shaving heads. See also

chapter ‘Ordering accessories’.

1 Switch off the shaver.

2 Press the release buttons on the

shaving unit and pull the shaving head

holder off the shaving unit (Fig. 7).

3 To unlock the orange retaining ring,

turn it in the direction of the arrows

indicated in and on the retaining

ring (Fig. 11).

4 Lift the retaining ring out of the

shaving head holder (Fig. 12).

5 Remove the shaving heads and place

new ones in the shaving head holder.

Make sure the two wings of the shaving

heads t exactly into the recesses.

6 Place the retaining ring back onto the

shaving head holder (1). To reattach

the retaining ring, turn it against the

direction of the arrows indicated in

and on the retaining ring (2) (Fig. 18).

Note: Make sure the retaining ring is xed

properly. The four wings of the retaining ring

have to be located exactly under the recesses

of the shaving head holder (Fig. 19).

7 Reattach the shaving head holder to

the shaving unit (‘click’) (Fig. 9).

Note: If the shaving unit does not close

smoothly, check if you have positioned the

shaving heads properly and if the retaining

rings are xed properly.

Ordering accessories

To purchase accessories for this

appliance, please visit our online shop at

www.shop.philips.com/service. If the

online shop is not available in your country,

go to your Philips dealer or a Philips service

centre. If you have any difculties obtaining

accessories for your appliance, please

contact the Philips Consumer Care Centre

in your country. You nd its contact details

in the worldwide guarantee leaet.

The following accessories are available:

- RQ32 Philips shaving heads

- HQ110 Philips Shaving Head Cleaning

Spray

Environment

- Do not throw away the appliance

with the normal household waste at

the end of its life, but hand it in at an

ofcial collection point for recycling.

By doing this, you help to preserve the

environment (Fig. 21).

- The built-in rechargeable shaver battery

contains substances that may pollute the

environment. Always remove the battery

before you discard or hand in the shaver

at an ofcial collection point. Dispose

of the battery at an ofcial collection

point for batteries. If you have trouble

removing the battery, you can also take

the appliance to a Philips service centre.

The staff of this centre will remove the

battery for you and will dispose of it in

an environmentally safe way (Fig. 22).

Removing the rechargeable

shaver battery

Only remove the rechargeable battery

when you discard the shaver. Make sure

the rechargeable battery is completely

empty when you remove it.

Be careful, the battery strips are sharp.

1 Undo the screw in the back panel of

the shaver with a screwdriver (1) and

remove the back panel (2) (Fig. 23).

2 Bend the hooks aside and remove the

power unit (Fig. 24).

3 Break the snap hooks (1) and remove

the front panel of the power unit

(2) (Fig. 25).

4 Take out the battery holder (1) and

cut the battery tags with a pair of

cutting pliers (2) (Fig. 26).

5 Remove the rechargeable battery.

常见问题

有关本说明书的更多信息

我们知道，为您的 飞利浦 RQ312 剃须刀 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 RQ312 剃须刀 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

飞利浦 剃须刀 的所有手册
剃须刀 的更多手册

关于 飞利浦 RQ312 剃须刀 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

飞利浦 PT925 剃须刀

说明书

飞利浦 RQ1290CC 剃须刀

说明书

飞利浦 HP6317 Body Contour Ladyshave 剃须刀

说明书

飞利浦 AT770 剃须刀

说明书

飞利浦 RQ330 剃须刀

说明书

飞利浦 PT786 剃须刀

说明书

飞利浦 HQ6986 剃须刀

说明书

飞利浦 HQ6950 剃须刀

相关类别