说明书 飞利浦 RQ360 剃须刀

说明书

’Battery low’ indication

- When the battery is almost empty, the

plug symbol starts ashing (Fig. 6).

- When you switch off the shaver, the

plug symbol continues to ash for a

few more seconds.

Travel lock

You can lock the shaver when you are going

to travel. The travel lock prevents the shaver

from being switched on by accident.

Note: The travel lock cannot be activated

when the shaver is connected to the mains.

Activating the travel lock

1 Press and hold the on/off button until

the travel lock symbol stops ashing

and the motor stops running (Fig. 7).

The travel lock is now activated.

Note: If you release the on/off button before

the travel lock symbol stops ashing, the travel

lock is not activated.

Deactivating the travel lock

1 Press and hold the on/off button until

the travel lock symbol stops ashing

and the motor starts running.

The shaver is now ready for use again.

Note: When you start charging, the travel lock

is deactivated automatically.

Charging

It takes approx. 60 minutes to fully charge

the battery.

When you charge the shaver for the rst

time or after a long period of disuse, let it

charge for 90 minutes.

A fully charged shaver provides up to 40

shaving minutes.

If you have a heavy beard, the shaver may

provide less than 40 shaving minutes. The

number of shaving minutes may also vary

over time, depending on your shaving

behaviour, cleaning habits and beard type.

Charging

Do not charge the shaver in a closed

pouch or in the packaging.

1 Put the small plug in the shaver.

2 Put the adapter in the wall socket.

, The battery symbol on the shaver

ashes to show that the shaver is

charging (see chapter ‘The display’).

Note: When you remove the adapter from the

wall socket and leave the small plug in the

shaver, the shaver may not work for a few

seconds.

Using the shaver

Note: You cannot use the shaver while it is

connected to the mains.

Shaving

Skin adaptation period

Your rst shaves may not bring you the

result you expect and your skin may even

become slightly irritated. This is normal. Your

skin and beard need time to adapt to any

new shaving system.

We advise you to shave regularly (at least

3 times a week) for a period of 3 weeks to

allow your skin to adapt to the new shaver.

During this period, use your new electric

shaver exclusively and do not use other

shaving methods. If you use different shaving

methods, it is more difcult for your skin to

adapt to the new shaving system.

1 Press the on/off button to switch on

the shaver.

2 Move the shaving heads over your

skin. Make both straight and circular

movements (Fig. 8).

3 Press the on/off button to switch off

the shaver.

4 Clean the shaver after every

shave (see chapter ‘Cleaning and

maintenance’).

Wet shaving

You can also use this shaver on a wet face

with shaving foam or shaving gel.

To shave with shaving foam or shaving gel,

follow the steps below:

1 Apply some water to your skin.

2 Apply shaving foam or shaving gel to

your skin.

3 Rinse the shaving unit under the tap

to ensure that the shaving unit glides

smoothly over your skin.

4 Press the on/off button to switch on

the shaver.

5 Move the shaving heads over your

skin. Make both straight and circular

movements.

Note: Rinse the shaver under the tap regularly

to ensure that it continues to glide smoothly

over your skin.

6 Dry your face and thoroughly rinse

the shaver with a sufcient amount

of water after every shave. Make sure

you rinse all foam or shaving gel off

the shaver (see also chapter ‘Cleaning

and maintenance’).

Trimming

You can use the trimmer to groom

your sideburns and moustache.

1 Pull the shaving unit straight off the

shaver (Fig. 9).

Note: Do not twist the shaving unit while you

pull it off the shaver.

2 Insert the lug of the trimmer into the

slot in the top of the shaver (1). Then

press down the trimmer (2) to attach

it to the shaver (‘click’) (Fig. 10).

3 Press the on/off button to switch

on the trimmer. You can now start

trimming.

4 Press the on/off button to switch off

the trimmer.

5 Pull the trimmer straight off the

shaver (Fig. 11).

Note: Do not twist the trimmer while you pull

it off the shaver.

6 Insert the lug of the shaving unit into

the slot in the top of the shaver

(1). Then press down the shaving

unit (2) to attach it to the shaver

(‘click’) (Fig. 12).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning

agents or aggressive liquids such as petrol

or acetone to clean the shaver and its

accessories.

- Clean the shaver after every shave.

- Clean the shaving heads frequently

with Philips Shaving Head Cleaning

Spray (HQ110) for optimal shaving

performance.

- You can clean the outside of the

shaver with a damp cloth. Do not clean

the shaving unit with a cloth.

Cleaning the shaving unit

Be careful with hot water. Always check if

the water is not too hot, to prevent your

hands from getting burnt.

1 Switch off the shaver.

2 Rinse the shaving unit under a hot tap

for some time (Fig. 13).

Note: You can also clean the shaving unit with

the cleaning brush supplied.

3 After rinsing the appliance under the

tap, hold it upright for 10-15 seconds

to allow water to run out of the

bottom.

4 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit

(2). (Fig. 14)

5 Rinse the shaving head holder under a

hot tap for 30 seconds (Fig. 15).

Note: You can also clean the shaving head

holder with the cleaning brush supplied.

6 Carefully shake off excess water and

let the shaving head holder dry.

Never dry the shaving head holder with

a towel or tissue, as this may damage the

shaving heads.

7 Reattach the shaving head holder

to the shaving unit (‘click’) (Fig. 16).

Extra-thorough cleaning method

1 Switch off the shaver.

2 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit

(2) (Fig. 17).

3 To unlock the orange retaining ring,

turn it in the direction of the arrows

indicated in and on the retaining

ring (Fig. 18).

4 Lift the retaining ring out of the

shaving head holder. (Fig. 19)

5 Remove the cutter and the shaving

guard (Fig. 20).

Note: Do not clean more than one cutter

and shaving guard at a time, since they are

all matching sets. If you accidentally put a

cutter in the wrong shaving guard, it may

take several weeks before optimal shaving

performance is restored.

6 Clean the cutter with the cleaning

brush supplied (Fig. 21).

7 Clean the inside of the shaving

guard (Fig. 22).

8 After cleaning, place the shaving guard

back into the shaving head holder.

Make sure the two wings t exactly

into the recesses of the shaving head

holder (Fig. 23).

9 Place the cutter back into the shaving

guard with the cutter legs pointing

downwards (Fig. 24).

10 Place the retaining ring back onto the

shaving head holder (1). To reattach

the retaining ring, turn it against the

direction of the arrows indicated in

and on the retaining ring (2) (Fig. 25).

Note: Make sure the retaining ring is xed

properly. The four wings of the retaining ring

have to be located exactly under the recesses

of the shaving head holder (Fig. 26).

11 Reattach the shaving head holder to

the shaving unit (‘click’). (Fig. 16)

Note: If the shaving unit does not close

smoothly, check if you have positioned the

shaving heads properly and if the retaining

rings are xed properly.

Cleaning the trimmer

Clean the trimmer after every use.

Cleaning the trimmer under the

tap

1 Switch on the appliance with the

trimmer attached.

2 Rinse the trimmer under a hot tap for

some time. (Fig. 27)

3 After cleaning, switch off the appliance.

4 After rinsing the appliance under the

tap, hold it upright for 10-15 seconds

to allow water to run out of the

bottom.

常见问题

有关本说明书的更多信息

我们知道，为您的 飞利浦 RQ360 剃须刀 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 RQ360 剃须刀 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

飞利浦 剃须刀 的所有手册
剃须刀 的更多手册

关于 飞利浦 RQ360 剃须刀 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

飞利浦 BRR474 剃须刀

说明书

飞利浦 HQ130 剃须刀

说明书

飞利浦 QP6523 OneBlade 剃须刀

说明书

飞利浦 RQ1275 SensoTouch 剃须刀

说明书

飞利浦 BRL170 SatinShave Prestige 剃须刀

说明书

飞利浦 BG2024 Bodygroom 剃须刀

说明书

飞利浦 QP2527 One Blade 剃须刀

说明书

飞利浦 HQ9020 剃须刀

相关类别