说明书 飞利浦 YQ306 剃须刀

说明书

Cleaning the shaving unit

Be careful with hot water. Always check if

the water is not too hot, to prevent your

hands from getting burnt.

1 Switch off the shaver.

2 Rinse the shaving unit under a hot tap

for some time (Fig. 7).

Note: You can also clean the shaving unit with

the cleaning brush supplied.

3 After rinsing the appliance under the

tap, hold it upright for 10-15 seconds

to allow water to run out of the

bottom.

4 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit (2).

(Fig. 8)

5 Rinse the shaving head holder under a

hot tap for 30 seconds (Fig. 9).

Note: You can also clean the shaving head

holder with the cleaning brush supplied.

6 Carefully shake off excess water and

let the shaving head holder dry.

Never dry the shaving head holder with

a towel or tissue, as this may damage the

shaving heads.

7 Reattach the shaving head holder

to the shaving unit (‘click’) (Fig. 10).

Extra-thorough cleaning method

1 Switch off the shaver.

2 Press the release buttons on the

shaving unit (1) and pull the shaving

head holder off the shaving unit (2)

(Fig. 11).

3 To unlock the orange retaining ring,

turn it in the direction of the arrows

indicated in and on the retaining ring

(Fig. 12).

4 Lift the retaining ring out of the

shaving head holder. (Fig. 13)

5 Remove the cutter and the shaving

guard (Fig. 14).

Note: Do not clean more than one cutter

and shaving guard at a time, since they are

all matching sets. If you accidentally put a

cutter in the wrong shaving guard, it may

take several weeks before optimal shaving

performance is restored.

6 Clean the cutter with the cleaning

brush supplied (Fig. 15).

7 Clean the inside of the shaving guard

(Fig. 16).

8 After cleaning, place the shaving guard

back into the shaving head holder.

Make sure the two wings t exactly

into the recesses of the shaving head

holder (Fig. 17).

9 Place the cutter back into the shaving

guard with the cutter legs pointing

downwards (Fig. 18).

10 Place the retaining ring back onto the

shaving head holder (1). To reattach

the retaining ring, turn it against the

direction of the arrows indicated in

and on the retaining ring (2) (Fig. 19).

Note: Make sure the retaining ring is xed

properly. The four wings of the retaining ring

have to be located exactly under the recesses

of the shaving head holder (Fig. 20).

11 Reattach the shaving head holder to

the shaving unit (‘click’). (Fig. 10)

Note: If the shaving unit does not close

smoothly, check if you have positioned the

shaving heads properly and if the retaining

rings are xed properly.

Storage

Note: Make sure the shaving unit is dry before

you store the shaver.

1 Put the protection cap on the shaver

after use to prevent damage and to

avoid dirt accumulation in the shaving

heads (Fig. 21).

Replacement

For maximum shaving performance, we

advise you to replace the shaving heads

every two years. Replace damaged shaving

heads right away.

Only replace the shaving heads with original

RQ32 Philips shaving heads. See also

chapter ‘Ordering accessories’.

1 Switch off the shaver.

2 Press the release buttons on the

shaving unit and pull the shaving head

holder off the shaving unit (Fig. 8).

3 To unlock the orange retaining ring,

turn it in the direction of the arrows

indicated in and on the retaining

ring (Fig. 12).

4 Lift the retaining ring out of the

shaving head holder (Fig. 13).

5 Remove the shaving heads and place

new ones in the shaving head holder.

Make sure the two wings of the shaving

heads t exactly into the recesses.

6 Place the retaining ring back onto the

shaving head holder (1). To reattach

the retaining ring, turn it against the

direction of the arrows indicated in

and on the retaining ring (2) (Fig. 19).

Note: Make sure the retaining ring is xed

properly. The four wings of the retaining ring

have to be located exactly under the recesses

of the shaving head holder (Fig. 20).

7 Reattach the shaving head holder to

the shaving unit (‘click’) (Fig. 10).

Note: If the shaving unit does not close

smoothly, check if you have positioned the

shaving heads properly and if the retaining

rings are xed properly.

Ordering accessories

To buy accessories or spare parts, please

visit www.shop.philips.com/service

or go to your Philips dealer. You can also

contact the Philips Consumer Care Centre

in your country (see the worldwide

guarantee leaet for contact details).

The following accessories are available:

- RQ32 Philips shaving heads

- RQ575 Philips cleansing brush

attachment

- HQ110 Philips Shaving Head Cleaning

Spray

Environment

Do not throw away the appliance with the

normal household waste at the end of its

life, but hand it in at an ofcial collection

point for recycling. By doing this, you help to

preserve the environment.

Removing the rechargeable

shaver battery

Only remove the rechargeable battery

when you discard the shaver. Make sure

the rechargeable battery is completely

empty when you remove it.

Be careful, the battery strips are sharp.

1 Undo the screw in the back panel of

the shaver with a screwdriver (1) and

remove the back panel (2) (Fig. 22).

2 Bend the hooks aside and remove the

power unit (Fig. 23).

3 Break the snap hooks (1) and remove

the front panel of the power unit (2)

(Fig. 24).

4 Take out the battery holder (1) and

cut the battery tags with a pair of

cutting pliers (2) (Fig. 25).

5 Remove the rechargeable battery.

Guarantee and support

If you information or support, please visit

www.philips.com/support or read the

separate worldwide guarantee leaet.

Guarantee restrictions

The shaving heads (cutters and guards)

are not covered by the terms of the

international guarantee because they are

subject to wear.

Troubleshooting

This chapter summarises the most common

problems you could encounter with the

appliance. If you are unable to solve the

problem with the information below, visit

www.philips.com/support for a list of

frequently asked questions or contact the

Consumer Care Centre in your country.

Problem Possible

cause

Solution

The shaver

does not

shave as

well as it

used to.

The

shaving

heads are

damaged

or worn.

Replace the

shaving heads

(see chapter

‘Replace-

ment’).

Problem Possible

cause

Solution

The shav-

ing heads

are dirty.

Clean the

cutters and

guards with

the clean-

ing brush

supplied

(see chapter

‘Cleaning and

maintenance’,

section ‘Extra-

thorough

cleaning

method’).

Long hairs

obstruct

the shaving

heads.

Clean the

cutters and

guards with

the clean-

ing brush

supplied

(see chapter

‘Cleaning and

maintenance’,

section ‘Extra-

thorough

cleaning

method’).

The shaver

does not

work

when I

switch it

on.

The re-

chargeable

battery is

empty.

Switch off

the shaver

and recharge

the battery

(see chapter

‘Charging’).

The

tempera-

ture of the

shaver is

too high. In

this case,

the shaver

does not

work.

Let the shaver

cool down. As

soon as the

temperature

of the shaver

has dropped

sufciently,

you can

switch on the

shaver again.

The shaver

does not

work, even

though it is

connected

to the

mains.

The re-

chargeable

battery is

empty.

Switch off

the shaver

and recharge

the battery

(see chapter

‘Charging’).

常见问题

有关本说明书的更多信息

我们知道，为您的 飞利浦 YQ306 剃须刀 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Philips。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 飞利浦 YQ306 剃须刀 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

飞利浦 剃须刀 的所有手册
剃须刀 的更多手册

关于 飞利浦 YQ306 剃须刀 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

飞利浦 HQ906 剃须刀

说明书

飞利浦 PT876 剃须刀

说明书

飞利浦 AT750 AquaTouch 剃须刀

说明书

飞利浦 PT920 PowerTouch 剃须刀

说明书

飞利浦 AT800 AquaTouch 剃须刀

说明书

飞利浦 HQ6986 剃须刀

说明书

飞利浦 BRL176 剃须刀

说明书

飞利浦 RQ311 剃须刀

相关类别