说明书 惠而浦AWF 808洗干一体机

说明书

Whirlpool is a registered trademark of Whirlpool USA

Add detergent as indicated on the front page and as

described in the chapter “Detergent and Additives”

in the Instructions for Use.

1. Turn the programme selector to the desired

programme.

2. The indicator of the predefined spin speed

lights up; in case you want to set another spin

speed, press the “Variable spin” button.

Press the button(s) of any required option(s) - the

respective indicator lights up.

When the combination of programme and

additional option(s) is not possible,

the indicators switch off automatically. Unsuitable

combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (e.g. sand, granular dirt).

Increases the cycle time by approx. 15 minutes.

• Do not use liquid detergent for the main wash

when activating the prewash option.

“Easy ironing” button

• Can be used together with “Cotton”,

“Synthetics” and “Dailywash” programmes to

make ironing easier.

• Increases the water quantity and the clothes are

spun very gently.

“Intensive rinse” button

• More water is added and the rinse cycle is

prolonged.

• This option is particularly suitable for areas with

very soft water, washing baby linen, and helps

people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water

without the final spin cycle, to avoid creasing and

prevent colours from changing.

• This option is particularly recommended for the

“Synthetics”, “Dailywash” or “Delicates”

programmes.

• It is particularly useful if you want to postpone

spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the

laundry to soak for too long.

Note: The programme stops to “Rinse hold” at

the time the “Rinse Hold” light in the programme

sequence indicator is on. The indicator next to

the “Start”

button flashes.

To terminate the “Rinse hold” option:

• Press the “Start” button; the programme will

terminate automatically with the final spin cycle

for the preset wash programme.

“Variable spin” button

• Every programme has a predefined maximum

spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spin is

cancelled but intermediate spin peaks remain

during rinse. The water is drained out only.

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. programme duration

(hours : minutes)*

White Cotton / Antibacterial 90 6.0 60** 1.70 2:09

Cotton 75 6.0 60 1.33 2:05

Cotton with “Eco”*** 60 6.0 57 0.94 2:07

Cotton 40 6.0 57 0.69 1:51

Synthetics 60 3.0 44** 0.88 1:51

Synthetics 40 3.0 44 0.43 1:39

Dailywash 40 4.0 40 0.39 1:28

Quickwash 35 3.0 37 0.27 0:41

Delicates 30 3.0 50 0.22 0:53

Wool 40 1.5 54 0.39 0:50

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumption data

may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*

The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

**

To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

***

Reference programme for energy label.

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

Press the button to select the drying time, in

automatic mode (at end of wash cycle) or in manual

mode, selecting the “Drying” programme (with

hand-washed laundry). In the latter case it is

necessary to spin at a speed of at least 800 rpm. The

set time is that indicated by the light on; when they

are all off drying is not carried out.

The “Start Delay” option allows you to programme

machine activation at a later stage, for example at

night when electricity is cheaper. Do not use liquid

detergent when activating the “Start delay”.

• Select the programme and options.

• Press the “Start Delay” button to select

programme start a delay time of 1 to 12 hours;

• Press the “Start” button.

The indicator next to the “Start Delay” button

lights up, whereas the selection indicator flashes

to signal the countdown of the remaining time.

• At the end of the delay time the machine starts

the set programme. The LED indicating the

wash stage in progress lights up.

• After pressing the “Start”, the number of hours

preselected can be reduced by pressing and

holding the “Start Delay” button.

To cancel the “Start Delay”:

Press the “Start Delay” button until all the indicator

lights are off. The selected programme will then start.

Open the tap and press the “Start”. The indicator

next to the “Start” button lights up. The

programme sequence indicator shows the current

programme stage, running from left to right through

Prewash/Wash, Rinse, Spin/Drain, End.

At the end of a programme, the “End” indicator

lights up signalling that the door can be opened. As

long as a wash programme is running, the door

remains locked and must not be forced open. In

case you have an urgent need to open it during a

running programme, refer to “Cancel (Reset) a

running programme before the end”.

“Service” indicator

Lighting up of the “Service” indicator can be caused by

a fault in an electrical component. Refer to the

“Troubleshooting Guide” in the Instructions for Use; If

the fault persists, contact our After-Sales Service.

“Clean pump” indicator

The water is not pumped out. Check whether the

drain hose is kinked or the filter must be cleaned; in

the latter case refer to the Instructions for Use

(“Removing the filter”).

“Water tap closed” indicator

Machine water supply insufficient or lacking. Open

the water tap; Turn the programme selector to

“Off/O” and reset the programme. If the indicator

remains on, refer to the “Troubleshooting Guide” in

the Instructions for Use.

“Door open” indicator

Lighting up of the indicator could be caused by the

door not being properly closed. Try closing it again.

Turn the programme selector to “Off/O” and reset

the programme. If the indicator remains on, refer to

the “Troubleshooting Guide” in the Instructions for

Use.

• Lighting up of the lamp on the wash sequence

indicator means that the programme has ended

and the door is unlocked.

1. Turn the programme selector to the “Off/O”

position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Turn the programme selector to “Off/O”.

2. Select the new programme, any options and

another spin speed if you want.

3. Press the “Start” button again. The new

programme resumes the wash programme from

where the previous one was interrupted. Do not

add detergent for this programme.

• Reset by turning the programme selector to

“Off/O” and select the “Drain Spin”

programme to remove the water remaining in

the bowl before the door can be opened.

DRYING TIME

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATOR

RED INDICATORS

PROGRAMME END

CHANGING PROGRAMME AND/OR

OPTIONS AFTER PROGRAMME START

CANCEL (RESET) A RUNNING

PROGRAMME BEFORE THE END

常见问题

有关本说明书的更多信息

我们知道，为您的 惠而浦AWF 808洗干一体机 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Whirlpool。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 惠而浦AWF 808洗干一体机 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

惠而浦洗干一体机 的所有手册
洗干一体机 的更多手册

关于 惠而浦AWF 808洗干一体机 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

惠而浦 WDD102724SRT 洗干一体机

说明书

惠而浦 TWD272204DSRT 洗干一体机

说明书

惠而浦AWI 308洗干一体机

说明书

惠而浦 WDD100944BAOT 洗干一体机

说明书

惠而浦AWF 814洗干一体机

说明书

惠而浦 EWDC406020RG 洗干一体机

说明书

惠而浦AWI 64121洗干一体机

说明书

惠而浦XQG100-ZD24108BC洗干一体机

相关类别