说明书 惠而浦AWF 810洗干一体机
需要您的 惠而浦AWF 810洗干一体机 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 5 个常见问题，0 条评论，有 1 票，平均产品评分为 100/100。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in the Instructions for Use.
1. Turn the
programme selector
to the desired
programme.
2. The indicator of the predefined
spin speed
lights up; in case you want to set another spin
speed, press the “Variable spin” button.
Press the button(s) of any required option(s) - the
respective indicator lights up.
When the combination of programme and
additional option(s) is not possible,
the indicators switch off
automatically. Unsuitable
combinations of options are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (e.g. sand, granular dirt).
Increases the cycle time by approx. 15 minutes.
• Do not use liquid detergent for the main wash
when activating the prewash option.
“Intensive rinse” button
• More water is added and the rinse cycle is
prolonged.
• This option is particularly
suitable for areas with
very soft water, washing baby linen, and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without the final spin cycle, to avoid creasing and
prevent colours from changing.
• This option is particularly recommended for the
“Synthetics”, “Dailywash” or “Delicates”
programmes.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the
laundry to soak for too long.
Note:
The programme stops to “Rinse hold” at
the time the “Rinse Hold” light in the programme
sequence indicator is on
. The indicator next to
the
“Start”
button flashes.
To terminate the “Rinse hold” option:
• Press the
“Start”
button; the programme will
terminate automatically with the final spin cycle
for the preset wash programme.
“Variable spin” button
• Every programme has a predefined maximum
spin speed.
• Press the button to set another spin speed.
• If spin speed “00” is selected, the final spin is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
Press the button to sele
ct the drying time, in
automatic mode (at end of wa
sh cycle) or in manual
mode, selecting the “Drying” programme (with
hand-washed laundry).
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
DRYING TIME
In the latter case it is necessary to spin at a speed of
at least 800 rpm. The set time is shown on the display
and varies from “00” to “180” minutes.
Drying is not carried out with set time “00”.
The “Start Delay” option allows you to programme
machine activation at a la
ter stage, for example at
night when electricity is ch
eaper. Do not use liquid
detergent when activating the “Start delay”.
• Select the programme and options.
• Press the “Start Dela
y” button to select
programme start a delay time of 1 to 16 hours;
•Pressthe
“Start”
button.
The indicator next to the
“Start delay”
button
lights up, whereas the selection made is shown
on the display. Its flashing indicates the
countdown of the remaining time.
• At the end of the delay time the machine starts
the set programme. The icon indicating the wash
cycle step being carried out at that moment is
displayed.
• After pressing the
“Start”
, the number of hours
preselected can be reduced by pressing and
holding the “Start Delay” button.
To cancel the “Start Delay”:
Press the
“Start delay”
button until the time
indicated on the display is “00”; the selected
programme will then start.
Open the tap and press the
“Start”
. The indicator
next to the
“Start”
button lights up.
At the end of a programme, the message “End”
appears on the display, indicating that the door can
be opened. As long as a wash programme is running,
the door remains locked and must not be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
E02-E03 “Service”
The display of this “Service” code can be due to a
faulty electrical component. Refer to the
“Troubleshooting guide” in
the Instructions for Use;
If the fault persists, contact the After-Sales Service.
E01 “Pump cleaning”
The water is not discharged. Check if the drain hose
is bent or if the filter requires cleaning; in the latter
case, refer to the Instructions for Use (“Removing
the filter”).
E00 “Water tap closed”
The washing machine water feed is insufficient or
lacking. Open the tap; Turn the programme
selector to “Off/O” and reset the programme. If the
fault remains displayed, consult the
“Troubleshooting guide” in
the Instructions for Use.
E04 “Door lock”
The display of this code could be due to the door not
being properly closed. Try closing it again. Turn the
programme selector to “Off/O” and reset the
programme. If the fault rema
ins displayed, consult the
“Troubleshooting guide” in
the Instructions for Use.
• At the end of the wash cycle, the message
“END” will appear on the display, indicating
that the door is unlocked.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and remove the washing.
4. Leave the door ajar to allow the drum to dry.
1. Turn the programme selector to “Off/O”.
2. Select the new programme, any options and
another spin speed if you want.
3. Press the
“Start”
button again. The new
programme resumes the wash programme
from where the previous one was interrupted.
Do not add detergent for this programme.
• Reset by turning the programme selector to
“Off/O” and select the “Drain Spin”
programme to remove the water remaining in
the bowl before the door can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATOR
DISPLAY ALPHANUMERIC INDICATIONS
END OF WASH CYCLE
CHANGING PROGRAMME AND/OR
OPTIONS AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. programme duration
(hours : minutes)
*
White Cotton / Antibacterial 90 6.0 60** 1.70 2:09
Cotton 75 6.0 60 1.33 2:05
Cotton with “Eco”*** 60 6.0 49 0.94 2:07
Cotton 40 6.0 57 0.69 1:51
Synthetics 60 3.0 44** 0.88 1:51
Synthetics 40 3.0 44 0.43 1:39
Dailywash 40 4.0 40 0.39 1:28
Quickwash 35 3.0 37 0.27 0:41
Delicates 30 3.0 50 0.22 0:53
Wool 40 1.5 50 0.39 0:50
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumptio
n data
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the hous
ehold
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference programme for energy label.
Loading…
常见问题
请给产品评分，告知您对惠而浦AWF 810洗干一体机看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 惠而浦AWF 810洗干一体机 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Whirlpool。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 惠而浦AWF 810洗干一体机 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Whirlpool |
| 模型 | AWF 810 |
| 类别 | 洗干一体机 |
| 文件类型 | |
| 文件大小 | 11.51 MB |
关于 惠而浦AWF 810洗干一体机 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
我的洗衣机干衣机发出很多噪音和/或大声振动，我该怎么办？ 验证
洗衣干衣机可能未调平。您可以通过调整脚以使其完全水平来实现此目的。该问题也可能是由于在机器中插入过多衣服而引起的。如果这些不是造成问题的原因，则应与制造商联系。
有帮助 (1321) 阅读更多“第六感”是什么意思? 验证
惠而浦电器配备了第六感技术的传感器，以确保最佳运行的机器。例如，在干衣机中，这些传感器会测量衣物中剩余的水分，并在衣物完全干燥时停止洗衣机。
有帮助 (803) 阅读更多我的洗衣机烘干机有异味，我该怎么办？ 验证
有具有自动清洁功能的洗衣机烘干机。如果没有这些功能，则可以添加100毫升白醋或100克苏打水晶体，并让洗涤干燥机运行90℃程序。
有帮助 (618) 阅读更多洗衣机干衣机与单独的洗衣机和干衣机之间的用法有何区别？ 验证
洗衣干衣机的最大优点是占用的空间更少。但是，单独的干衣机将比洗衣机干衣机干得多。洗衣机干衣机还消耗相对更多的能量，并且需要更多的时间。
有帮助 (348) 阅读更多可以将洗衣机烘干机连接至延长线吗？ 验证
需要大量电源的设备（例如洗衣机干衣机）无法连接到所有延长线上。查看洗衣机干燥机的功率（以瓦特为单位），并检查延长线是否可以处理。有些延长线带有较粗的电缆，用于处理较大的设备。
有帮助 (302) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 惠而浦AWF 810洗干一体机 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。