说明书 惠而浦AWO 41628洗衣机
需要您的 惠而浦AWO 41628洗衣机 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 13 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
SELECT DESIRED FUNCTION
Press the desired option button and the corresponding indicator lights up.
When the combination of selected programme and the desired additional
option is not practicable, the option will be cancelled and the indicator
switches off immediately..
“Eco”
With a prolonged washing duration and lower washing temperature, a
desirable washing performance can be obtained and reduces energy
consumption.
“Prewash”
Suitable for heavily soiled loads (for example with sand and dust) and
the programme duration is prolonged for 15 minutes.
“Easy Ironing”
Can be used together with “Cotton”, “Synthetics” programmes to make
ironing easier.
To avoid creasing, water level is increased and gentle spin programme
is applied.
“Intensive Rinse”
Performance Data
Programme
Cotton
Cotton
Cotton
Cotton
Cotton
Synthetics
Synthetics
Daily Load 60 min
Daily Load 60 min
Quick Wash 30 min
Delicate
Wool
Wool
Handwash
Temperature
(°C)
95
60
40
30
Cold water
40
Cold water
40
Cold water
30
30
40
Cold water
Cold water
Load
(kg)
7.5
7.5
7.5
7.5
7.5
2.5
2.5
3.0
3.0
3.0
1.5
1.0
1.0
1.0
Programme Duration
(approximately) (hour:minute)
2:15
2:10
1:59
1:55
1:54
1:15
1:10
0:55
0:50
0:30
0:40
0:46
0:41
0:35
Performance data is measured in normal condition in compliance with IEC/EN60456 GB/T4288 standard. Energy and water consumption of domestic use is subject
to water pressure, temperature and the type of wash.
The actual programme time may deviate from the values in the table. The washing programme will be adjusted automatically according to the washing condition.
To reduce the water temperature for preventing of wrinkles, cold water is added automatically after the main wash cycle and before draining process.
Standard Testing for Washing Programme
ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
Add the detergents as described in the “Detergents and softener” section
in the User Manual and close the door after adding detergents.
Turn the programme selector knob to the desired programme and
temperature. The indicator next to
the “Start / Pause” button is
flashing.
The predefined spin speed indicator corresponding to the selected
programme lights up.
Adding one more rinsing programme and extend its rinsing duration.
This option is particularly suitable for areas with very soft water,
washing baby linen and helps people with allergies.
“Rinse Hold”
The laundry remains in the last rinse water without proceeding to
the spin cycle to avoid creasing and fading
This function is recommended for washing synthetic and delicate
clothes.
This function is very effective to delay the spinning time.
Note: When the “rinse-hold” light in the programme sequence is on and
the indicator next to “Start / Pause” button flashes, the programme
switches to rinse hold sequence and the programme stops.
How to stop the “Rinse Hold” Programme
Press the “Start / Pause” button, the washing machine
automatically switches to the spinning process of the selected
programme option, and the programme ends.
If you do not want to spin the clothes, please turn the programme
selector knob to the position of “Drain” programme and press the
“Start / Pause” button.
Variable Spin
Every programme has an automatic predifined maximum spin speed
Press button to select desired spin speed.
If the spin speed “0” is selected, the final spinning is cancelled.
Draining will occur when the programme ends, but spinning
continues during rinsing programme.
Programme Start
Open the tap and press the “Start/Pause” button. The indication lamp
next to the “Start/Pause” button lights up. The programme sequence
indicator shows the current programme phase, running from left to right
through Prewash, Wash, Rinse, Spin/Drain.
●
When the programme phase is finished, the corresponding indicator
goes out.
“Door Open” Indicator
Before the programme starts and after it ends, the indicator will light up
and the door of the machine can be opened. When the Programme is
running, the door will remain locked and cannot be forced open or the
machine will be damaged. If you need to open the door urgently during
the programme is running, please refer to the Chapter of “Cancel / Reset
A Running Programme Before It Ends”.
Red Indicator for Warning
Water tap closed
The appliance has no or insufficient water supply. Open the water tap; if
the indicator still lights up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
Clean Pump
Waste water is not pumped out. Check whether the drain hose is kinked
or clogged. Clean the filter if it is the latter case. Please refer to the
chapter of “Removing the filter” in the Instructions for Use.
Programme Ends
All of the lights of the programme sequence are off. “Door Open”
indicatior lights up.
1. Turn the Programme selector to the “Off” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry out.
Change Programme and Options after the Programme Starts
1 Press the “Start/Pause” button to pause the Programme. The indicator
flashes.
2. Select the new programme and any additional function. Select the spin
speed if necessary.
3. Press the “Start/Pause” button again to start a new programme.
The new Programme continues at the same position where
the
previous Programme was interrupted, so no additional detergent is
needed.
Cancel / Reset A Running Programme Before It Ends
Press the “Reset” button to cancel a programme before the programme
ends
Press the “Reset” button for at least 3 seconds. Any water that remains
in the appliance will be drained out before the door is opened.
Whirlpool is a registered trademark of Whirlpool USA
461970434011
Loading…
常见问题
请给产品评分，告知您对惠而浦AWO 41628洗衣机看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 惠而浦AWO 41628洗衣机 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Whirlpool。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 惠而浦AWO 41628洗衣机 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Whirlpool |
| 模型 | AWO 41628 |
| 类别 | 洗衣机 |
| 文件类型 | |
| 文件大小 | 1.52 MB |
关于 惠而浦AWO 41628洗衣机 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
洗衣机无法排水，我该怎么办? 验证
洗衣机不排水的主要原因是泵或排水软管堵塞。如果能够接触到洗衣机的上述部件，可尝试清除所有可能存在的堵塞物。如果这样仍无法解决问题，或无法接触上述部件，应联系机修工或制造商。
有帮助 (24098) 阅读更多我的洗衣机门无法打开，该怎么办？ 验证
可能有多种原因。最常见的原因是过滤器堵塞。拔下设备电源，然后检查过滤器。如有必要，清除任何堵塞物。过滤器的位置因模型而异。也有可能使用特殊的杠杆来打开门。如果这些选项都无济于事，那么最后的选择是拔下设备的电源插头30-60分钟，然后尝试打开门。如果这不起作用，请与制造商或机械师联系。
有帮助 (8368) 阅读更多我的洗衣机发出很多噪音和/或大声振动，我该怎么办？ 验证
洗衣机可能未调平。您可以通过调整脚以使其完全水平来实现此目的。该问题也可能是由于在机器中插入过多衣服而引起的。如果这些不是造成问题的原因，则应与制造商联系。
有帮助 (6969) 阅读更多洗涤剂应放入哪个隔室？ 验证
大多数洗衣机都有3个用于洗涤剂的隔间。这些隔室通常用I，II和*标记，以显示去污剂的去向。隔室I用于预洗循环，隔室II用于主洗涤循环，*用于织物柔软剂。隔间II最常用。
有帮助 (5128) 阅读更多我可以将洗衣机连接到热水出口吗？ 验证
尽管洗衣机可能可以处理高达65°C的进水量，但大多数制造商并不建议这样做。有专门使用冷水的洗涤循环。在这种情况下，温水可能会损害您的洗涤周期。而且，许多洗衣机被设计为连接到冷水出口。
有帮助 (3048) 阅读更多我可以把烘干机和洗衣机叠放在一起吗? 验证
一般来说，可以将烘干机和洗衣机直接堆叠在一起。这只适用于一些模式。然而，明智的做法是使用一个配件来做到这一点。这将防止机器振动和脱落，也防止损坏机器的底部。
有帮助 (1358) 阅读更多洗衣机干衣机与单独的洗衣机和干衣机之间的用法有何区别？ 验证
洗衣干衣机的最大优点是占用的空间更少。但是，单独的干衣机将比洗衣机干衣机干得多。洗衣机干衣机还消耗相对更多的能量，并且需要更多的时间。
有帮助 (1326) 阅读更多我可以将洗衣机连接到延长线上吗？ 验证
需要大量电源的设备（例如洗衣机）无法连接到所有延长线上。查看洗衣机的功率（以瓦特为单位），并检查延长线是否可以处理。有些延长线带有较粗的电缆，用于处理较大的设备。
有帮助 (1325) 阅读更多“第六感”是什么意思? 验证
惠而浦电器配备了第六感技术的传感器，以确保最佳运行的机器。例如，在干衣机中，这些传感器会测量衣物中剩余的水分，并在衣物完全干燥时停止洗衣机。
有帮助 (912) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 惠而浦AWO 41628洗衣机 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。