说明书 Jamo S808 SUB 低音炮
需要您的 Jamo S808 SUB 低音炮 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 0 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
CONNECTIONS AND CONTROLS
CAUTION: Ensure that the subwoofer is unplugged from the AC wall outlet before making
any connections.
“LINE IN” Connection - Most of today’s surround receivers (and pre-ampliers) have a line
level subwoofer output labeled Subwoofer Pre Out, Sub Out, SW Out, etc. If you have this
output, connect one end of a subwoofer cable to it and connect the other end of the cable
into the subwoofer line input labeled LEFT/LFE. This connection allows the subwoofer to
operate with both music and surround sound movies (refer to your receiver manual).
Level
- If your subwoofer is connected to a Subwoofer Output of a surround receiver, rst
set the subwoofer volume level control in the receiver to the “half way” or “0 dB” position.
Then increase the volume (or gain) of the subwoofer up until the subwoofer’s volume level
matches the output of your main speakers. After this setup is completed, the volume control
on your system’s main amplier or pre-amplier will be the volume control for both your
subwoofer and speakers together.
“LOWPASS” Control - The crossover point chosen determines where low bass frequencies
are “handed o” from the speakers to the subwoofer. If setting the crossover point in the
receiver, turn the Lowpass Filter knob on the subwoofer to the farthest point right (160Hz).
Set the crossover point based on the size of the main left/right speakers you are using in
the system. As a general rule, for larger, oorstanding speakers, set the crossover point
between 50Hz-90Hz. If using small bookshelf or “satellite” speakers for the mains, set the
crossover point between 90Hz-150Hz. The smaller the speaker, the higher the setting
until the bass frequencies blend well between the speakers and your subwoofer once your
system is completely hooked up. If your receiver does not have a crossover point setting, set
the Lowpass Filter on the subwoofer instead within the same recommended settings (see
receiver manual for additional speaker setup info).
“PHASE” 0/180 - This control is used to acoustically match the subwoofer’s output to your
main speakers. Select the position, either 0° or 180°, in which your subwoofer has more
output at the listening position.
“POWER” AUTO/ON/OFF - When this switch is in the “AUTO” position, the subwoofer will
automatically turn “on” when it senses a signal. It will automatically go into “standby mode”
after 15-20 minutes with no signal. When this switch is in the “OFF” position, the subwoofer
will remain “o” until the switch is manually turned back to the “ON/AUTO” position.
Power LED indicator - Located on the front bae, this LED indicates the operating status
of the built-in amplier. The LED will light green when the amplier is on and receiving
a signal. If the LED is dark and not lit, the amplier is o. For more information on the
controls mentioned in this manual and on bass management, see your dealer or visit
www.jamo.com
Loading…
常见问题
请给产品评分，告知您对Jamo S808 SUB 低音炮看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 Jamo S808 SUB 低音炮 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Jamo。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 Jamo S808 SUB 低音炮 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Jamo |
| 模型 | S808 SUB |
| 类别 | 低音炮 |
| 文件类型 | |
| 文件大小 | 0.65 MB |
加入有关该产品的对话
您可以在这里分享您对 Jamo S808 SUB 低音炮 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。