说明书 JBL Control X Wireless 扬声器
需要您的 JBL Control X Wireless 扬声器 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 5 个常见问题，1 条评论，有 4 票，平均产品评分为 50/100。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
4
© 2015 HARMAN International Industries, Incorporated. All rights reserved.
JBL and CMMD are trademarks of HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Bluetooth
®
is a registered trademark of Bluetooth SIG, Inc.
Features, specifications and appearance are subject to change without notice.
HARMAN International Industries, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
TR01319_A
2. Press the association button on the primary speaker. An audible
confirmation will be played to indicate that the speaker successfully
entered association mode. The front LED will blink blue if already
paired with a Bluetooth device, otherwise it will blink white.
3. Wait until association process finishes. The process is complete as
soon as the front LED on each speaker stops blinking.
Note: in case the association needs to be redone for speaker replace-
ment or configuration change, the current association set up needs to
be reset. Press and hold the FWD and REV buttons on the top of the
primary speaker for more than 3 seconds.
It is also possible to associate a second pair of JBL control X wireless
speaker set to an existing pair to extend the system coverage. If you
want to have a set of 4 speakers connected.
1. With all four primary and secondary speaker(s) powered on AC or
Battery power
2. Use a paper clip to press the association button on the back of
the second set primary speaker with the back control mode switch
set to secondary “S”. The front LED will flash white indicating
Association mode is active.
3. Press the association button on the primary speaker of the first
master set. An audible confirmation will be played to indicate that
the speaker successfully entered association mode. The front LED
will blink blue if already paired with a Bluetooth device, otherwise it
will blink white.
4. Wait until association process finishes. The process is complete as
soon as the front LED on each speaker stops blinking.
5. Use a paper clip to press the association button on the back of
the second set secondary speaker. The front LED will flash White
indicating Association mode is active.
6. Press the association button on the secondary speaker of the first
master set. An audible confirmation will be played to indicate that
the speaker successfully entered association mode. The front LED
will blink blue if already paired with a Bluetooth device, otherwise it
will blink white.
7. Wait until association process finishes. The process is complete as
soon as the front LED on each speaker stops blinking.
Note: in case the association needs to be redone for speaker
replacement or configuration change, the current association set up
needs to be reset. Press and hold the FWD and REV buttons on the
top of the primary speaker for more than 3 seconds.
MAINTENANCE AND SERVICE
The speaker enclosures may be cleaned using a soft cloth to remove
fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade
periodically. The frequency of maintenance depends on the metals
involved in the connections, atmospheric conditions and other factors,
but once per year is the minimum. In the event that your system ever
needs service, contact your local JBL dealer or distributor, or visit
www.jbl.com for a service center near you.
BATTERY DISPOSAL
Rechargeable batteries (i.e., nickel cadmium, nickel metalhydride,
lithium and lithium-ion) are considered hazardous household materials
and may pose an unnecessary health and safety risk.
In the European Union and other locations, it is illegal to dispose of any
battery with household trash. All batteries must be disposed of in an
environmentally sound manner. Contact your local waste management
officials for information regarding the environmentally sound collection,
recycling and disposal of used batteries.
SPECIFICATIONS
Low Frequency Transducer:
5.25" (133mm) polypropylene
graphite-filled cone
High Frequency Transducer:
1” (25mm) CMMD
®
Lite dome /
High Definition Imaging Waveguide
Rated Power: 30W per channel RMS (AC mode)
Frequency Response: 62Hz - 20kHz (-6db)
Sensitivity: (2.83V@1m) 87dB
Signal-to-noise ratio: >75 dB
Power supply: AC 100-240 VAC, 50-60Hz
Battery Type: Lithium-ion Polymer (7.4V, 2600mAh)
Battery Charge Time: 2.4 hours @ 0.5C
Playback Time:
Up to 4 hours (varies by volume level
and audio content)
Bluetooth
®
2.1 with AVRCP
profile v1.5
Bluetooth
®
Transmitter Power: 0-4 dBm
Bluetooth
®
Transmitter
Frequency Range:
2.402 – 2.480 GHz
Bluetooth
®
Transmission Range: Up to 10m (from source)
Speaker Range:
Up to 30m (between primary and
secondary speakers)
Dimensions:
9-1/4” x 6-1/2” x 6-1/4”
(235mm x 165mm x 159mm)
Weight: 6.5 lbs (2.95 kg)
Finishes: Graphite / White / Red
AC IN
AUX-IN
L/R/L+R
P S
MODE WALL/OTHER
Loading…
常见问题
请给产品评分，告知您对JBL Control X Wireless 扬声器看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 JBL Control X Wireless 扬声器 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系JBL。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 JBL Control X Wireless 扬声器 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | JBL |
| 模型 | Control X Wireless |
| 类别 | 扬声器 |
| 文件类型 | |
| 文件大小 | 5.21 MB |
关于 JBL Control X Wireless 扬声器 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
对于儿童来说，什么级别的噪音安全？ 验证
儿童的听力受损要比成人快。因此，重要的是不要让儿童暴露于大于85dB的噪声中。对于耳机，有针对儿童的特殊型号。如果是扬声器或其他情况，则必须注意噪音不要超过该水平。
有帮助 (178) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 JBL Control X Wireless 扬声器 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。
回复 | 有帮助 (0) (谷歌翻译)