说明书 Lucide35700/10/36 Flatt灯
需要您的 Lucide35700/10/36 Flatt灯 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 7 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
Safety Instructions
Please read this notice carefully and keep it all along the use of this product. Follow the instructions for a safe and correct
installation and functioning of the fitting. The manufacturer does not accept any responsibility for damage caused by improper
installation and service. Installation should always be done by qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation,
please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or
inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is
damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or another qualified electrician. This is to avoid
all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the
correct bulb (respect type and maximal wattage as indicated on the product).
Installation of items in bathroom:
Since each country has its own regulations, please check
them with qualified people, before installing lighting products
in the bathroom.
Below we will explain general requirements.
Zone 0: At least IPX7, and a voltage level according to SELV
is allowed in this zone. SELV means “security extra low
voltage”. In general this means maximum 12V. We
recommend that the lights are installed by a qualified
electrician in this zone.
Zone 1: At least IPX4, Only lighting fixtures with an IP of
minimum IPX4 and a voltage level according to SELV is
allowed in this zone. We recommend that the lights are
installed by a qualified electrician in this zone.
Zone 2: At least IP44. If items are not low voltage, then they
need to be installed at a height of at least 1.6m.
Zone 3: This zone includes all the space which is not mentioned in the 3 other zones (0, 1 and 2). As long as the water can not spat
on the lighting or steam can not get fixated on the light, then an IP21 is ok.
Specific remarks:
If the bottom of the basin for bath or shower is higher than 15cm from the ground, then the heights need to be calculated from the
bottom of the basin.
If there is no basin then the height for zone 0 is 10cm.
In the Netherlands the height of 225cm for zones 1 and 2 is replaced by 260cm.
Symbol Explanation of the symbols which can appear on the fixture
This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits
that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and
recycling. Electrical and electronic equipment marked with this symbol indicating separate
collection of such equipment must be returned to a municipal waste collection point.
Please respect the minimum distance from the bulb to inflammable objects.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to
the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth
wire.
If the protection glass is damaged or broken, it needs to be replaced immediately.
Loading…
常见问题
请给产品评分，告知您对Lucide35700/10/36 Flatt灯看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 Lucide35700/10/36 Flatt灯 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Lucide。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 Lucide35700/10/36 Flatt灯 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Lucide |
| 模型 | 35700/10/36 Flatt |
| 类别 | 灯 |
| 文件类型 | |
| 文件大小 | 0.42 MB |
关于 Lucide35700/10/36 Flatt灯 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
我在灯中放了一个新灯，但无法打开，为什么？ 验证
有些灯是为特定功率的光源而制造的。当插入所需功率比灯泡可提供的功率更高的光源时，灯可能无法打开。如果灯泡提供的功率比制造的功率高得多，则光源可能会烧坏。
有帮助 (315) 阅读更多为什么光的颜色很重要？ 验证
通常有两种光，暖光和冷光。冷光使您保持清醒和清醒。温暖的灯光具有放松效果。光线的温度以开尔文（Kelvin）为单位进行测量，并在灯泡本身的包装上显示出来。
有帮助 (255) 阅读更多存在哪些螺丝座？ 验证
在世界范围内，有许多类型的插座，但使用最多的是基于Edison螺丝的插座，并以字母E表示。在大多数国家/地区，螺丝底座E27和E14是标准的。在美国，E26，E17，E12和E10是标准配置。
有帮助 (142) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 Lucide35700/10/36 Flatt灯 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。