说明书 OrisAquis Source of Life手表
需要您的 OrisAquis Source of Life手表 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 6 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
you can see how the red rotor, the
hallmark of Oris watches, rotates
and winds the movement.
Manual winding movement.
A
On mechanical Oris watches with
manual winding, the barrel spring
is wound by hand. The power
reserve of a fully wound watch is
approximately 42 hours.
Release the screw-down crown
or QLC crown (if fitted) as per the
instructions in chapter 1.
Turn the crown clockwise in
position 1. It can also be turned
forwards and backwards.
Stop as soon as you encounter
resistance. The barrel spring is now
fully wound.
If more force is applied after
the spring is fully wound, there
is a risk of the end of the spring
breaking. In such cases, the
barrel needs to be replaced at
the watch owner’s expense.
Wind the watch once a day.
Lock the screw-down crown or
QLC crown (if fitted) as per the
instructions in chapter 1.
it clockwise until you encounter
resistance.
The watch is only water-resistant
to its specified depth if the pusher
has been screwed down.
pushers must never be operated
underwater.
Automatic winding
movement.
a
An Oris watch that has started
and is worn daily for about
12 hours, does not need manual
winding. Instead, arm movements
cause the red rotor to rotate,
thereby tightening the barrel
spring. Even if you take off your
watch at night, it continues to run.
It only stops working if it is not
worn for approx. 40 hours.
If an automatic winding watch
stops, it must be restarted as
follows:
Release the screw-down crown or
QLC crown (if fitted) as per the
instructions in chapter 1.
With the crown in position 1, rotate
it clockwise through 12 turns
(it can also be turned forwards
and backwards).
Carry out the settings, as
described below.
Lock the screw-down crown or
QLC crown (if fitted) as per the
instructions in chapter 1.
On the crystal case-back of certain
Oris automatic winding watches,
11
Crown with Oris Quick Lock
system (QLC).
r
The Quick Lock Crown (QLC)
developed by Oris is simpler to
release than the screw-down
crown because it has a bayonet
fastening instead of a thread.
Press the crown gently against the
case and turn it slightly anti-clock-
wise until the crown releases.
Now the crown is in position 1 and
can be operated as described in
the following chapters.
After the setting, the crown must
be relocked by pressing it against
the case and, at the same time
while turning it slightly clockwise
until it locks in position.
The watch is only water-resistant
to its specified depth if the crown
has been locked.
Screw-down pusher.
?
Some Oris models, especially
diving watches, have screw-down
pushers as well as screw-down
crowns.
Turn the crown which encloses
the pusher anti-clockwise until you
encounter resistance.
Now the pusher can be operated,
as described in the following
chapters.
After the setting, press the crown
gently against the case and turn
Crown positions.
The positions described below
are valid in most cases. Any
deviations will be mentioned for
the relevant type of movement.
Pos. 0
Crown locked, for
screw-down crowns
and for crowns with
Oris Quick Lock
system
Pos. 1
Winding position
Pos. 2
Date and day of
the week setting
Pos. 3
Setting the time
None of the following operations
must be performed in water.
Starting Oris watches.
Standard crown.
Oris standard crowns are high-
precision components. They are
equipped with seals to prevent
any water penetration. About half
of Oris watches are equipped with
this kind of standard crown.
The crown is in position 1 and
can be operated immediately, as
described in the following chapters.
Screw-down crown.
B
A few Oris watches, especially
the divers’ watches, are equipped
with a screw-down crown. Before
you can operate a crown of this
kind, it must first be unscrewed.
Turn the crown anti-clockwise until
it is released from its thread.
Now the crown is in position 1 and
can be operated as described in
the following chapters.
After the setting, the crown must
be tightened back down by
pressing it against the case while
turning it clockwise.
Check from time to time to ensure
that the crown is properly screwed
down.
The watch is only water-resistant
to its specified depth if the crown
has been screwed down.
English
2
|
0
2
|
0
2
|
0
2
|
0
Loading…
常见问题
请给产品评分，告知您对OrisAquis Source of Life手表看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 OrisAquis Source of Life手表 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Oris。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 OrisAquis Source of Life手表 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Oris |
| 模型 | Aquis Source of Life |
| 类别 | 手表 |
| 文件类型 | |
| 文件大小 | 34.37 MB |
关于 OrisAquis Source of Life手表 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
设备中的电池被氧化了，我仍可以安全使用吗？ 验证
Ja，该设备仍然可以安全使用。首先，取出氧化电池。切勿徒手操作。然后用蘸有醋或柠檬汁的棉签清洁电池盒。晾干并插入新电池。
有帮助 (789) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 OrisAquis Source of Life手表 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。