说明书 Timex TW2V00200JR Expedition 手表

说明书

2

ENGLISH 990-095926-07

The date function advances the date between the hours of 10 PM and 2 AM.

Avoid setting the date during this timeframe. If you attempt to set the date

during this time period, rotate the crown at a very slow rate to avoid damaging

the watch.

DAY / DATE MODELS

TO SET THE TIME:

1. PULL the crown out to the “C” position.

2. TURN the crown either way to the correct time.

3. PUSH in the crown to the “A” position.

TO SET THE DATE:

1. PULL the crown out to the “B” position.

2. TURN the crown either way to the correct date.

3. PUSH in the crown to the “A” position.

TO SET THE DAY:

1. PULL the crown out to the “C” position.

2. TURN the crown either way for full 24 hour cycle to set day.

3. PUSH the crown in to the “A” position.

TO SET THE BILINGUAL DATE:

If your watch is equipped with a bilingual day display, you may select the

desired language by advancing the day display.

1. PULL the crown out to the “C” position.

2. Repeatedly move the time back to 11pm and forward to 4am until you see

the current day displayed in the desired language.

3. PUSH the crown in to the “A” position.

TO SET THE DATE AND 4TH HAND (GMT MODELS)

If your watch is equipped with a GMT function, you may set the 4th center hand

to display a 2nd time zone.

1. PULL the crown out to the “B” position.

2. TURN the crown clockwise to the correct date.

3. TURN the crown counter-clockwise to the correct 4th hand position for the

2nd time zone you are tracking

4. PUSH in the crown to the “A” position.

C

B

A

DATE

CROWN POSITION

MOON PHASE MODELS

TO SET TIME:

1. PULL crown all the way out and turn to correct time.

2. Push crown in to restart. For screw-in setting crown, push crown in while

turning CLOCKWISE to tighten.

TO SET “MOON PHASE” FEATURE:

1. Pull crown to “Middle” position (B) and turn CLOCKWISE or

COUNTERCLOCKWISE until correct moon phase appears.

Caution: Wearing or storing the watch with the crown in the “middle” position

will cause damage to the movement. Always return the crown to the normal

position, or if you wish to save the battery life while storing the watch, leave the

crown in the “out” position.

EASY SET ALARM

A B C

D E F

MINUTE MARKER

HOUR MARKER

ALARM SET

TURNING RING

ALARM CROWN

PULL CROWN “OUT” TO

ACTIVATE THE ALARM

POSITION

POSITION

TIMEKEEPING/INDIGLO

®

NIGHT-LIGHT

CROWN. PUSH CROWN TO ACTIVATE

THE INDIGLO

®

NIGHT-LIGHT

EASY SET ALARM WITH DATE & INDIGLO

®

NIGHT-LIGHT

1. From the “A” position, PUSH the TIMEKEEPING CROWN in (towards the

watch case) to activate the INDIGLO

®

Night-Light and illuminate the watch

dial.

EASY SET ALARM DATE & TIME SETTINGS

TO SET THE DATE:

1. With the TIMEKEEPING CROWN in the “B” position TURN the

TIMEKEEPING CROWN or TURNING RING in either direction to set the date.

TO SET THE TIME:

1. With the TIMEKEEPING CROWN in the “C” position TURN the

TIMEKEEPING CROWN or TURNING RING in either direction to set the time.

EASY SET ALARM SETTINGS

1. Your easy set alarm watch is equipped with two types of alarms:

2. 12-Hour Alarm: rings OR vibrates twice per day at the desired hour and

minute as long as the alarm is activated. (Alarm crown must be in “E”

position.)

3. Hourly Alarm: rings OR vibrates every hour at the desired minute if activated.

(Alarm crown must be in “F” position.)

TO SET THE 12-HOUR ALARM:

1. With the ALARM CROWN in the “D” position, TURN the ALARM CROWN or

TURNING RING in either direction to set the hour and minute alarm markers.

To activate the alarm to ring or vibrate at the desired time, PULL the ALARM

CROWN out to the “E” position. A single beep sound and flash, OR a

vibration will indicate that the 12-Hour Alarm is activated.

2. The alarm will sound and the dial will flash OR vibrate at the desired time

(hour and minute) and will repeat every twelve hours unless the alarm is

deactivated.

NOTE: Alarm is deactivated when the ALARM CROWN is in the “D” position.

If the alarm is not deactivated it will automatically stop ringing after 20 beeps

and flashes OR stop vibrating, and will resume in 12 hours at the indicated time.

TO SET THE HOURLY ALARM:

1. With the ALARM CROWN in the “D” position, TURN the ALARM CROWN or

TURNING RING in either direction to set the minute alarm marker.

2. To activate the alarm to ring or vibrate at the desired minute, PULL the

ALARM CROWN out to the “F” position. Three beeps sound and flash OR a

vibration indicates the Hourly Alarm is activated.

3. The alarm will sound and the dial will flash OR vibrate at the desired minute

and will repeat every hour on the specified minute unless the alarm is

deactivated.

NOTE: Alarm is deactivated when the ALARM CROWN is in the “D” position.

If the alarm is not deactivated it will automatically stop ringing after 20 beeps

and flashes OR stop vibrating, and will resume again in one hour at the

indicated minute.

CB

A

CROWN POSITION

常见问题

有关本说明书的更多信息

我们知道，为您的 Timex TW2V00200JR Expedition 手表 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Timex。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 Timex TW2V00200JR Expedition 手表 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。

规格

Timex 手表 的所有手册
手表 的更多手册

关于 Timex TW2V00200JR Expedition 手表 的常见问题

我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。

相关产品

说明书

Timex TW2V28600VQ Waterbury 手表

说明书

Timex T2P043 手表

说明书

Timex TW2V40100JT Easy Reader 手表

说明书

Timex TW2U96100VQ Fairfield 手表

说明书

Timex TW2V22600VQ Expedition 手表

说明书

Timex TW2V25200JT Easy Reader 手表

说明书

Timex TW2V45700VQ Waterbury 手表

说明书

Timex TW2V40800JR Expedition 手表

相关类别