说明书 Timex TW2V37400JR Waterbury 手表
需要您的 Timex TW2V37400JR Waterbury 手表 手册吗？ 您可以在下面免费查看和下载中文版 PDF 手册。 该产品目前有 6 个常见问题，0 条评论，有 0 票。 如果这不是您想要的手册，请联系我们。
您的产品是否出现故障而说明书没能提供解决方案？请前往 Repair Café 以获得免费维修服务。
说明书
Loading…
3
ENGLISH 990-095926-07
PERPETUAL CALENDAR
Your Perpetual Calendar watch accurately keeps track of how many days are in
each month. It also adjusts for leap years. The date on your watch (including the
month and year) was preset at the factory to Eastern Standard Time, Greenwich
Mean Time or Hong Kong Standard Time (depending on where you purchased
your watch). You only need to adjust the time.
I
I
WED 14
I
I
WED 14
CHECK DATE
(FACTORY USE ONLY)
SET TIME
DAY, DATE
MIDDLE OUT
TO SET TIME
To set time, simply pull crown all the way out and turn. Day and date change
automatically when time is adjusted past midnight; there is no additional step for
setting day or date. Push crown in when done.
After setting, if date changes at noon, time needs to be adjusted ahead or back
12 hours.
If crown is accidentally put in MIDDLE position and turned, date display will
change temporarily, but date setting is unaected. Simply pull crown all the way
out and set time. Proper date display will resume.
PERPETUAL CALENDAR WATCH
FREE LIFETIME BATTERY REPLACEMENT**
If the battery needs to be changed, we recommend that only TIMEX replace it.
Your watch will need to be recalibrated to correct time and date after changing the
battery. To return your watch to Timex, visit the retailer where you purchased your
watch or go to http://www.timex.com/productWarranty.html for information on
contacting Timex.
** Shipping & handling charges apply.
NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE
OF PERSONAL VALUE IN YOUR SHIPMENT.
ELAPSED TIME RING
If your watch is equipped with a rotatable outer ring on the face, with numbers
corresponding to minutes, you can use this Elapsed Time Ring to time an
activity from the start, or to mark the ending time for the duration of an activity.
TO TIME AN ACTIVITY FROM THE START:
Set the Start/Stop triangle at the time (hour or minute) when you start the
activity (As shown on the left in the illustration shown below). At completion, you
can see how long the activity took.
TO MEASURE THE TIME REMAINING:
Set the triangle to the hour or minute position when you wish to complete the
activity, and check the watch periodically for progress towards that goal.
In the illustration shown on the previous page on the right you can stop when
the minute hand reaches the 20 minutes past the hour position.
TACHYMETER RING
The tachymeter feature can be used to measure speed in miles per hour (MPH),
nautical miles per hour (knots) or kilometers per hour (KPH) using the sweep
second hand and the scale on the wall above the watch face. You need to know
the actual distance you are covering in miles or km.
Start the chronograph with the second hand at zero (the twelve o’clock position).
Within the first minute, the second hand will point to the rate for a one-mile (or
one kilometer) course: if it takes 45 seconds, the hand will point to 80 at that
position – 80 MPH or 80 KPH.
If within the first minute, a distance greater than one mile or kilometer is covered,
multiply the tachymeter number by the distance to get the actual rate: if you went
1.2 miles in 45 seconds, multiply the 80 by 1.2 – 96 MPH.
COMPASS RING
If your watch is equipped with a movable ring around the dial marked at the
letters “N”, “E”, “W”, “S” (for the four compass directions) or compass degrees,
you can use this feature to find an approximate compass directional reading.
1. Lay the watch on a flat surface, or hold it so that the face is parallel to the
ground.
2. Locate the sun and point the hour hand at the sun.
3. In the A.M., rotate the ring until the “S” (south) marker is halfway between
the hour hand and 12:00 (after the hour hand or within the shortest distance
between the hour hand and 12:00).
4. In the P.M., rotate the ring until “S” is before the hour hand and halfway
between the hour hand and 12:00.
12
1
2
3
4
5
6
7
8
9
10
11
N
S
W
E
HOW TO ADJUST BRACELET
(Variations of the following bracelet sections apply to all watch models).
SLIDING CLASP BRACELET
1. Open locking plate.
2. Move clasp to desired bracelet length.
3. Exert pressure while holding locking plate and slide clasp back and forth until
it engages in grooves on underside of bracelet.
4. Press locking plate down until it snaps closed. Clasp can be damaged if
excessive force is used.
FOLDOVER CLASP BRACELET
1. Find spring bar that connects bracelet to clasp.
2. Using a pointed tool, push in spring bar and gently twist bracelet to
disengage.
3. Determine wrist size, then insert spring bar in correct bottom hole.
4. Push down on spring bar, align with top hole and release to lock in place.
FIG. 1 FIG. 2 FIG. 3
Loading…
常见问题
请给产品评分，告知您对Timex TW2V37400JR Waterbury 手表看法。您是否希望分享对该产品的体验或提出问题？请在页面底部留言。有关本说明书的更多信息
我们知道，为您的 Timex TW2V37400JR Waterbury 手表 提供纸质手册是件好事。 您随时可以从我们的网站下载该手册并自行打印。 如果您想要原始手册，我们建议您联系Timex。 他们也许能够提供原始手册。 您是否正在寻找其他语言版本的 Timex TW2V37400JR Waterbury 手表 手册？ 在我们的主页上选择您的首选语言并搜索型号以查看我们是否有可用。
规格
| 品牌 | Timex |
| 模型 | TW2V37400JR Waterbury |
| 类别 | 手表 |
| 文件类型 | |
| 文件大小 | 4.22 MB |
关于 Timex TW2V37400JR Waterbury 手表 的常见问题
我们的支持团队将搜索有用的产品信息并回答常见问题。如果您在常见问题中发现不准确的回答，请使用联系表格告知我们。
设备中的电池被氧化了，我仍可以安全使用吗？ 验证
Ja，该设备仍然可以安全使用。首先，取出氧化电池。切勿徒手操作。然后用蘸有醋或柠檬汁的棉签清洁电池盒。晾干并插入新电池。
有帮助 (804) 阅读更多
加入有关该产品的对话
您可以在这里分享您对 Timex TW2V37400JR Waterbury 手表 的看法。 如果您有疑问，请先仔细阅读手册。 可以使用我们的联系表索取手册。